How To Create A Custom Towel Rack From Picture Frames

How To Create A Custom Towel Rack From Picture Frames

Photo by Lauren Fleischmann on Unsplash
 
Whether you need to hang bath towels in the bathroom or hand towels in the kitchen, a towel rack is an awesome thing to have around. And it is even better if made custom to suit your tastes and elevate the look of your home. For even more brownie points, you can make the towel rack yourself — and all it takes is some old picture frames and a little bit of elbow grease. Ready to start this fun project? Follow these seven easy steps.
 

1. Gather Your Tools & Materials

To create your custom towel rack, you will need:
  • 7 Old picture frames in various sizes
  • 1/2-inch screws
  • Drill
  • Screwdriver
  • Wood filler
  • Plastic wall anchors
  • Paint and brushes
  • 220-grit sandpaper
  • Old newspaper
  • Hanger

2. Mock Up Your Design

Working on the ground, mock up the design for your picture frame towel rack. Start with the largest frame in the center, as that will be used to secure the completed towel rack to the wall. You should have the frames overlap enough that you can secure each one together using two screws.
 

3. Screw the Frames Together

After finalizing your custom design, use your drill to create pilot holes for your screws. Then, screw the frames together, one by one, being careful to avoid cracking the wood. Cover the tops of the screws with wood filler, creating a seamless surface.
 

4. Sand & Paint the Frames

With the frames assembled, sand down the exterior surfaces to scuff up the finish. This will help the paint stick to the surface. Then, put down the newspaper and place your frames on top. Use your paintbrushes to apply a new coat of paint in your desired color. Allow the initial coat to dry for four hours, then repeat. Allow the second coat to fully dry overnight, though 24 hours is better.
 

5. Add a Hanger to the Back

Unless your central picture frame already has a hanger, you will need to add one to the back to create a solid mounting point. If your towel rack is a bit on the large side, consider using two mounting points to give it enough strength when the extra weight of the towels is added.  
 

6. Mount the Rack on the Wall

Put the towel rack against the wall to find your preferred installation point. Remember to account for the length of the towels when they are folded over the bottom edges of the frames. Then, drill a hole, or two if you have dual hangers, in the wall, big enough for the plastic anchor.
 
Use the handle of your screwdriver to tap the plastic anchor into the holes you just made. Then, add a screw to each plastic anchor and secure them almost all the way down with your screwdriver. With those in place, you can then hang the towel rack from the screws in the wall.
 

7. Add Towels & Enjoy

After securing your towel rack to the wall, you just hang your towels to complete this project. You can then go about your business, secure in the knowledge that you always have a towel close at hand when you need one.

Work With John

John simply shares with you some of the quirks of mountain properties and his knowledge of the area that many years of experience have given him. His job is to help you make the right choice in a home and to get the lifestyle you want!

Follow John on Instagram